Microwave Communication Trainer
Features :Microwave Communication Trainer helps the students to train themselves about experiment in microwave components design and manufacturing & measurement applying microstrip line theory and microwave device design theory.
For these experiment, standard devices and others with software program are supplied
Functions :Communication using the Microwave system
- Measurement in Microwave system
- FSK Modulation & Demodulation in microwave band
- File transfer & data transmission
- Understanding of the microstrip line design theory
- Understanding of the basic theory of microwave devices
- Design & simulation of microwave devices
Training Contents :
- Introduction to Microwave Communication Trainer
- FSK Modulator
- R F Amplifier
- Antenna
- Low Noise Amplifier
- Power Divider
- Band Pass Filter
- Detector
- FSK Demodulator
- Microwave Communication experiments
General Specifications :
- Frequency Band : 2.4 GHz ~ 2.5 GHz
- Modulation : FSK
- Bit Rate : 4800 ~ 14400 Bps
- Output Power : +4.5dbm
- Impedance : 50 ohms
- Substrate material : Rogers RO4003C
- PCB thickness : 0.508 mm
- Dielectric constant : 3.3
Module Specifications :
Base band transmitter :
Frequency band : 2.4 ~ 2.5 GHz
Gain : 26 dB
Noise figure : 2.5 dB
Input p1 dB : -25dBm
Power divider :
Type : 2 way, Wilkinson
Frequency band : 2.4 ~ 2.5 GHz
Return loss : 14 dB
Insertion loss : 0.5 dB
Band pass filter (2.4 GHz) :
Type : Edge-coupled
Center frequency : 2.4 GHz
Return loss : 10 dB
Insertion loss : 7.0 dB
Band pass filter (2.5 GHz) :
Type : Edge-coupled
Center frequency : 2.5 GHz
Return loss : 10 dB
Insertion loss : 7.0 dB
R F amplifier :
Frequency band : 2.4 ~ 2.5 GHz
Gain : 15 dB
Input : -5dBm
Antenna & Receiving :
Type : YAGI (PCB type)
Center frequency : 2.45 GHz
Gain : 9 dBi
VSWR : 1.5 : 1
Components Device :
FSK Modulator : 1 ea
FSK Demodulator : 1 ea
R F Amplifier : 2 ea
Detector : 2 ea
Band Pass Filter 2.4 GHz : 1 ea
Band Pass Filter 2.5 GHz : 1 ea
Power Divider : 1 ea
Low Noise Amplifier : 1 ea
YAGI antenna : 2 ea
DC Power Adaptor (1.2V / 1.5A) : 2 ea
DC Power Cable : 2 ea
RS 232C Cable : 2 ea
R F Cable : 3 ea
Carrying Bag : 1 ea
Antenna Cable : 2 ea
Antenna Supporter : 2 set
SMA Adaptor : 6 ea
50 Ohm Terminator : 1 ea
Software program : 1 ea
Answer sheet in CD : 1 ea
Program CD : 1 ea
