Slip & Creep Measurement Apparatus

We are leading manufacturer and suppliers of Slip & Creep Measurement Apparatus. Now accepting bulk orders for government tenders around the globe.

Slip & Creep

Product Code: 1.06.01/ATICO75615

Slip & Creep Measurement Apparatus Manufacturer

Description:

This apparatus is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a variable speed motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by variable speed drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (optional) it is possible to demonstrate the slip of belt on driving and driven pulley.

Technical Details :
Motor                                 :           Variable speed motor, 1HP, 1500 RPM.
Pulleys                              :           Driving and driven pulleys of equal diameters (flat pulleys)
Loading Arrangement       :           Brake drum along with spring balance and rope provided to load the system.                            arrangement is
Belts                                  :           Flat belts of fixed length of two different belt materials
Belt tightening arrangement :        Bearing block is sliding and dead weight can be applied to set the                                              initial tension in belt.
Speed Indicator                 :           2 Channel digital speed indicator with switch to change                                                                  channel.

Experimentation:
To measure co-efficient of friction between pulley material and different belt materials.
To measure power transmitted with varied belt tension.
To measure percentage slip at fixed belt tension by varying load on the brake drum and plot the graph of (T1-T2) v/s percentage slip i.e. “Slip Characteristics”.
To measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts.
To study creep of belt.

Utilities Required :
Electricity supply: 220 V, Single Phase, 0.5 kW.
Space: 1.5mx 1.0m

Tell us your requirement

Sending your message...

Your Cart

Your Cart is Empty! Go Shopping