Ready to Educate Modular Robotic Training Cell
- Robot : reach 601 mm
- Maximum Payload : 63 kg
- Pose Repeatability (ISO 9283) : ± 0.015 mm
- Number of Axes : 6
- Mounting Position Floor : Ceiling; Wall; Desired angle.
- Footprint : 179 x 179 mm
- Axis Data Motion Range : A1 : ± 170°
- A2 : – 195° / 40°
- A3 : – 115° / 150°
- A4 : ± 185°
- A5 : ± 120°
- A6 : ± 350°
- System : Application Package Pro for basic training for typical robotic tasks
- Magazine : Magazine for nine cubes with integrated holder for three different tools. “Hot wire”
- Participants train precise robot motions by guiding the wire loop along the contours.
- Pen & paper – For training continuous path motions, analogous to welding and gluing by robot.
- The spring-loaded pen prevents damage to the application. The use of standard DIN A4 paper enables instructors to create their own exercises for training courses as well as practical tests.
- Application Package – Vision : This package has four different cell configurations. The package includes a fix mounted camera, mounting bar and lens, unlimited offline programming licenses, as well as following :-
- Additional Vacuum Gripper
- Alignment Station
- Cabling and Energy Supply
- Calibration Plate
- Dropbox
- Slider
- Application Package – PLC : This package includes a Siemens PLC with a Christiani learning board, as well as following :–License for TIA portal programming Seven (7) hardware digital IO’s. The training cell :- user-friendly Preconfigured and ready for operation Including example programs and exercises. Including a gripper and a range of workpieces. Access via two sliding windows. Suitable for a variety of tasks.Varying levels of difficulty. Scalable solution for minimizing initial investments. Interfaces to external systems are possible
- Wave-Shaped Table : Provided for the possibility of programming and tracing three-dimensional contours.
- The pen is used as a tool for this and directly traces the laser-marked contour.
- Load Spreader Plates : Provided to reduce the surface pressure on sensitive floors. For this, the cell is
- simply placed on the load spreader plates made of powdered metal. The cell feet create a form fit with an internal contour and thus cannot slip. For the complete training cell
- Power Supply Connection : 200 – 240 VAC, 50 Hz, Single Phase
- Compressed Air : 6-8 bar
- Weight : 390 kg
- Dimensions : 1860 (H) x 1200 (W) x 900 (D) mm / 880 (D) mm without installed safety sensors.
