Forced Convection Apparatus

We are leading manufacturer and suppliers of Forced Convection Apparatus. Now accepting bulk orders for government tenders around the globe.

Forced Convection

Product Code: 1.06.01/ATICO75628

Forced Convection Apparatus Manufacturer


The apparatus consists of blower unit fitted with the test pipe. Nichrome wire heater surrounds the test section. Four Temperature Sensors are embedded on the test section, two placed in the air stream at the entrance and exit of the test section to measure the inlet and outlet air temperature.

Test pipe is connected to the delivery side of the blower along with the orifice to measure flow of air through the pipe. Constant heat flux is given to pipe by an electric heater through a variac and measured by Digital Voltmeter and Digital Ammeter.

Technical Details :
Test section                       :           Horizontal, externally heated 32mm, Length : 500mm
Diameter                           :           28 mm (approx.) Length : 400 mm (approx.)
Blower                               :           FHP of Standard make.
Heater                               :           Nichrome Wire
Air Flow Measurement     :           Orifice meter (Dia 14 mm) & Water Manometer.

To determine average surface heat transfer coefficient for a pipe by forced convection.
Comparison of heat transfer coefficient for different airflow rates and heat flow rates.
To plot surface temperature distribution along the length of pipe.

Utilities Required :
Electricity Supply: 1 Phase, 220 V AC, 10 Amp.
Floor area of 1.2 m x 0.5 m.

Tell us your requirement

Sending your message...

Your Cart

Your Cart is Empty! Go Shopping