Existent Gum Bath for Gum Content in Fuels by Jet Evaporation
Description：
- Existent Gum Bath is designed and made as per standards ASTM D381Standard test method for gum content in fuels by jet evaporation.
- Existent Gum Bath is suitable to determine the existent gum content of aviation gasoline and motor gasoline(Not suitable to determine the existent gum content of aviation turbine fuel)
- It is designed with unique air compressor and flowmeter to meet industrial requirements.
Feature:
- Gasoline Existent Gum Tester equips a specially designed heating bath. The gas circuit is designed reasonably and the effect of evaporation is good.
- The material of working bench is stainless steel. It has 3 sample wells. A pressure gauge shows the flow rate when steam vaporizing medium is used. A ball float type flowmeter shows the flow rate when air vaporizing medium is used. It can determine 5 samples at a time.
- Gasoline Existent Gum Tester is desktop structure. Simple design and easy to operate
Core Advantage:
- Safety multi-function head for simultaneous positioning
- Draining system
- Thermal protection shield
- 5-test station metal heating block
- Air and steam flow calibration sets (optional)
Simple and convenient operation:
- The multi-function head was designed for the safe and simultaneous positioning of all 5 pre-adjusted jet tubes. No manual handling and assembling of the hot conical jet tubes is required. After one turn only, all tubes are in their resting, pre-heating or working position. The position of the handle assures that neither steam nor hot air is hazardous to the operator.
- Safe withdrawal of condensed water from sample beakers and the compensation of uncontrolled steam eruptions is assured by an efficient draining system.
- Over-temperature protection cut-off.
- Customized User Flexibility
Specifications:
- Power supply: AC(220±10%)V, 50Hz, 3500W
- Dimension of evaporation bath: Φ260mm*130mm
- Sample positions: 5 positions
- Dimension of sample positions: Φ51mm*70mm
- Working temperature; (160~165)℃
- Temperature control: Automatic
- Temperature display: Digital display
- Flow rate display: Float ball type
- Working pressure of air reducing valve: 0.07MPa
- Air flow rate of jet outlet: 600mL/s for each hole
- Dimension: 590*480*340mm
- Air compressor: user-supplied
