Description
This simple yet comprehensive experiment module consists of a duct with transparent front and rear. The front has scales printed on it to position the various parts during the experiments. A Pitot tube and simple mass balance are attached to the outside of the duct for wake traverse and direct drag measurements respectively. It comes with three models all of the same frontal area:
A cylinder with a protractor, and a pressure tapping in its outer wall
A flat plate
A symmetrical aerofoil shape with a NACA profile
All the models fi t in the arms of the mass balance for the wake traverse and direct measurement experiments. For cylinder pressure distribution experiments, the arms of the mass balance can be rotated clear of the duct and the cylinder model fi tted between the duct walls directly. Both the Pitot tube and the cylinder tapping connect to the Manometer (ancillary) via fl exible tubes fi tted with quick-release couplings.
Learning Outcomes
- Determination of the drag coefficient by measurement of the pressure distribution around the cylinder.
- Determination of the drag coefficient by wake traverse.
- Determination of the drag coefficient around the cylinder by direct measurement and comparison to results obtained by pressure distribution and wake traverse.
- Direct measurement and comparison of drag coefficient between a cylinder, flat plate and aerofoil.
Specifications
- ATICO is committed to a programme of continuous improvement; hence we reserve the right to alter the design and product specification without prior notice.
- Pa c k e d d i m e n s i o n s a n d w e i g h t: 0.2 m3; 10 kg, 100 mm x 50 mm transparent duct
Operating Conditions
- O p e r at i n g e n v i r o n m e n t:
Laboratory - S t o r a g e t e m p e r at u r e r a n g e :
–25°C to +55°C (when packed for transport) - O p e r at i n g t e m p e r at u r e r a n g e :
+5°C to +40°C - O p e r at i n g r e l at i v e h u m i d i t y r a n g e :
80% at temperatures < 31°C decreasing linearly to 50% at 40°C
