Description : Mobile Laboratory Workbench Mobile workstation system with profile plate that can be used on both sides (1100 mm) and ER mounting frame type. With 1100 x 700 mm profile plate and ER frame Fixed drawer unit for installation in mobile workstations Fixed drawer unit with four lockable steel drawers, fully extendable and with safety stop.
Type : Fixed Drawer Unit Pneumatic with 4 drawers Holder for laboratory cables
Compressor : Oil-lubricated, Very quiet (45 dB (A)) compressor. This makes it ideal for use in classrooms. Fitted with pressure reducer and water separator. Pressure Range : 800 kPa (8 bar) Pmax, Suction capacity : 50 Ltr./min – Tank Volume : 24 Ltrs.
- Compressed Air Outlet : ¼” or KD4″ – Noise Level : 45 dB (A)/1 m
- Duty Cycle : 50%
- Pressure Regulator : Provided with gauge
- Power Supply Unit : Input Voltage : 110 – 240 V AC (-/+ 10%) 50 – 60 Hz /1.0 – 0.52 A for mounting frame
- Output Voltage : 24 V DC / max 4 A
- Safety Features : Short-circuit-proof
- Fuse : T2L / 250 V
- Dimensions : 170 x 240 x 92 mm
- Complete Set : Consisting of 98 safety laboratory cables with 4 mm safety plugs in the colors Red and Blue :–
- 10 x Red 50 mm
- 10 x Blue 50 mm
- 26 x Red 300 mm
- 11 x Blue 300 mm
- 21 x Red 500 mm
- 12 x Blue 500 mm
- 3 x Red 1000 mm
- 3 x Blue 1000 mm
- 1 x Red 1500 mm
- 1 x Blue 1500 mm
- Plugs : with rigid protective sleeve and axial socket
- Conductor : Cross Section : 1 mm2 – 1000 V CAT II
- Rated Current : 16 A
- Configuration / Components : As listed below :–
- 2 x 3/2-Way Valve with Pushbutton Actuator, Normally Closed
- 1 x 3/2-Way Valve with Pushbutton Actuator, Normally Open
- 1 x 5/2-Way Valve with Selector Switch
- 1 x 3/2-Way Valve with Selector Switch, Normally Closed
- 2 x 3/2-Way Roller Lever Valve, Normally Closed
- 2 x Proximity Sensor, Pneumatic, with Cylinder Attachment
- 1 x Pneumatic Timer, Normally Closed
- 1 x Pressure Sequence Valve
- 1 x 3/2-Way Valve, Pneumatically Actuated at one end
- 1 x 5/2-Way Valve, Pneumatically Actuated at one end
- 3 x 5/2-Way Double Pilot Valve, Pneumatically Actuated at both ends
- 1 x Shuttle Valve (OR)
- 2 x Dual-Pressure Valve (AND)
- 1 x Quick-Exhaust Valve
- 2 x One-Way Flow Control Valve
- 1 x Single-Acting Cylinder
- 1 x Double-Acting Cylinder
- 1 x Start-up Valve with Filter Control Valve
- 1 x Pressure Regulator Valve with Gauge
- 2 x Pressure Gauge
- 1 x Manifold
- 2 x Plastic Tubing, 4 x 0.75 Silver 10 m
- Workbook : Includes as below :-
- Sample Solutions
- Training Notes
- Multimedia CD-ROM with Graphics, Photos of Industrial Applications animations, and Circuit Diagrams
- Exercise Sheets for Trainees
