This Automatic Penetrometer is designed and developed to characterize tar and asphalt materials, and this test has been used to measure the texture of fats within a limited range. Of course, the texture of such materials is highly sensitive to temperature, so careful temperature control is crucial for reproducible results.
This automatic penetrometer is designed and manufactured in accordance with the requirements of T0604 “Asphalt Penetration Test” in JTG E20 “Test Code for Asphalt and Asphalt Mixtures in Highway Engineering”, GB/T 4985 “Determination of Penetration of Petroleum Wax”, GB/T 4509 “Determination of Penetration of Petroleum Asphalt”, GB/T 269 “Determination of Cone Penetration of Lubricating Greases and Greases” in the transportation industry standard. It is mainly suitable for determining the penetration of asphalt, paraffin and lubricating grease
Technical Specification:-
Measurement Range : 0-600 penetration needle
Resolution : 0.01mm (0.1 penetration)
Timing Controller : 5s, 8s, 10s, 12s, 30s, 60s (with a time error of less than ± 0.1s)
Temperature Accuracy : 25°C ± 0.1°C
Stirring : Magnetic Stirrer, Rotary Stirring
Constant Temperature Bath : Made of Hard Glass chamber
Working Environment : Temp. Ranging : from 15 to 35°C
Relative Humidity ≤ 85
Power Supply : 220 (±10%) VAC, 50 Hz, Single Phase
Dimension (L x W x H) : 260 ×400 × 640 mm
Net weight : 16kg.
Optional Accessories : Grease Masher: It is used in the tests which determine the cone penetration of lubricating grease (or petrolatum)
Other Cones: 1/2 scale cone，1/4 scale cone
Sample Cup: grease sample cup
