Features:
- Understanding fundamentals of Marker Beacon and its components.
- 0-10 A DC current meter and 0-30 V DC voltmeter
- Reception test
- The system mounted on a metal/aluminum mobile stand.
- Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
- Delivered fully assembled tested and ready to operate
- Colored Ultraviolet printing method on aluminum composite panel
Components:
- MB (Marker Beacon panel)
- Indicator lamp.
- MB antenna with coaxial connector
- Dc Power Box
- Circuit Breaker
- Circuit Breaker Lockout
- Audio jack
- Volume control
- Speaker
- HI/LO sensitivity switch
- 20A power supply
- Current and voltage meters
- Assembled and wired according to aeronautical regulations
- Aeronautical standard connectors and jackets
- Components Technical Specs
Specification
- 75MHz Crystal Controlled
Sensitivity:
- Low: 1000 mVolts (Hard) (360 to 570 mV soft)
- High: 200 mVolts (Hard) (130 to 200 mV soft)
- Selectivity: -6 dB at ±10 kHz, -40 dB at ±120 kHz
- External Lamp Output: 7.5 (±4 VDC unloaded, at maximum brightness) VDC positive when active, max. current 125 mA per lamp output
- MM Sense: Active high (4.5 ± 1.0VDC)
- Output impedance: 510 µ
- Audio Output: 38 mW <5% THD typical
