Application:
- Engine coolant manufacturer
- Related testing department
Engine Coolant Foaming Tendencies Tester Advantage:
- This Engine Coolant Foaming Tendencies Tester uses glassware to determine foam tendency of engine coolants under certain temperature and ventilation.
- The Engine Coolant Foaming Tendencies Tester adopts high temperature resistant glass tank as heating bath which makes sure the uniform temperature of working environment.
- This Engine Coolant Foaming Tendencies Tester is equipped with special airflow control system, and it can reduce the error caused by manual intervention.
- In use, the foaming tendency of a coolant solution may be increased by service aging or contamination. A properly functioning pressure cap will tend to suppress foaming in coolant solutions.
Technical Features：
- Stainless steel frame, with Pyrex tank and lid, can put and fix 2 cylinders, without steel ring to avoid floating. There are 2 flow meters, and 1 control box contains all electronic devices;
- The stainless steel frame can be tested at 88℃;
- Aluminum cover, there are 2 holes on it to put the cylinder, the locking clip can fix the cylinder and the thermometer jacket;
- Electronic heating bath with agitator on it;
- Stainless steel heater;
- The stainless steel refrigeration ring, when connected to the cooling water source, can control the bath temperature to 24℃, which meets the requirements of ASTM D892 serial number 1;
- The adjustable flow meter is connected with needle valve, support frame and exhauster;
- Two exhausters, original Norton (aluminum ball) or Mott (stainless steel cylinder), with certain penetration and aperture;
- Two 1000ml scaled Pyrex cylinders with rubber plugs and air inlet and outlet pipes on them;
- Microcomputer controller, PID function, digital display temperature (continuous display during testing), degree 0.1°C,Pt100 RTD temperature probe;
- It is very convenient to access the control box
Product Parameters：
- Temperature controlling range: 88±1ºC
- Air flow: 1000±25ml/min
- Working cell: 2 holes
- Pressure display: pressure meter
- Pressure adjustment: flowmeter adjustment
- Stirring mode: motor agitation
- Heating mode: Heating tube
- Power supply; AC220V/50Hz
- Instrument dimensions: 520mm*360mm*690mm
- Net weight: 42kg
