Description:
The contains a reservoir of cooled fluid, which is pumped through the external process to be coole (eg heat exchanger system). The cooling fluid can be water, or a mixture of glycol and water, dependent on the output temperature required. This fluid is cooled by the integral refrigeration system. A high-pressure pump is used to pump the fluid through the process. A bypass valve facility enables the fluid to be recirculated independently of the process conditions. Compressor: Reciprocating hermetically sealed compressor with a refrigerant cooled motor. Evaporator: Packaged coil type made of copper tubes and aluminium fins. Condenser: Single air-cooled condenser manufactured from aluminium fins mechanically bonded to refrigeration grade copper tubes. The condenser fan is of a low-noise axial type. Fan blades are fully enclosed by a safety grill.
Features
- Continuously recirculating glycol solutions for cold-chilled liquid temperatures
- Temperature controller on chilled liquid outlet enables stable processing
- High cooling capacity
- Integral high-capacity liquid pump
- Mobile unit
- Washable control panel
- Optional stainless steel casing
Specification
- Refrigerant: R407C Freon
- Max ambient temp: 32°C
- Process pump:
- Head: 6 bar max
- Flow rate: 4.8 m3/hr at 3.7 bar
- Reservoir capacity: 25l
Dimensions
- Depth: 0.70m
- Width: 0.80m
- Height: 0.53m
